Behringer X32 + Midas DL32

IEM mix guide

New to self-mixing, or just want a refresher? Start with the steps below, then use the starting-point levels further down as your reference during soundcheck.

1

Get connected

P16 users: adjust your mix directly on the P16 personal mixer — no app needed. Xvive users: connect your phone to the RCOG_Worship network and open MX-Q, MXBus, or M32-Q. Select your bus (Stage Left = Bus 4, Center = Bus 5, Right = Bus 6). Ask Tom if you're not sure which one is yours.

2

Start with your own sound

Bring your own instrument or voice up first — around 90–100%. This is your foundation. Everything else gets layered in around it, so it should never disappear.

3

Add your timing and pitch reference

Bring in Click if you play a rhythm instrument (drums, bass, guitar), and Pad if you sing or play something melodic. On P16 these are dedicated slots (13 and 14). On Xvive, Click and Pad aren't automatic — pull them into your own mix via the app if you want them.

4

Layer in the rest of the band

Add Tom's talkback so you can hear cues, then bring up whatever else helps you feel connected — kick/bass for groove, lead vocal to follow the song. Use the starting percentages further down this page as a reference point, not a rule.

5

Fine-tune at soundcheck

Trust your ears over the numbers. Too loud? Pull it down. Can't hear the click? Push it up. There's no wrong answer except a mix that doesn't work for you — ask for help if something feels off.

Protect your hearing: loud enough to hear clearly is enough. Riding the overall level too hot adds up over a service.
New to self-mixing? Start minimal — click (if needed), your own sound, and lead vocal. Add more once that feels stable.
Something sounds off to one ear? Check panning in your app (Xvive) or on the unit (P16) before assuming it's the hardware — ask Tom if it persists.
Feedback, buzz, or dropout? Turn down first, then check your pack's battery and connection. Flag it to Tom right away.

Starting-point reference — adjust from here

Primary / pitch ref Click / timing Lead vocal / cue Tom MD Supporting

P16 — personal mixer · musicians · 6 users

Tom — MD + Electric

Adjusted directly on the P16 unit · slots 5–6 + 16

P16
Own guitar
100%
Click
80%
Pad
70%
All vocals
65%
Kick / bass
55%
Ben keys
35%
Melvin keys
25%
Acoustic gtr
20%

Drummer

P16 slot 12

P16
Click
100%
Tom MD
70%
Bass
65%
Lead vocal
45%
Electric gtr
35%
Acoustic gtr
30%
Ben keys
25%
Pad
15%

Bass guitar

P16 slot 11

P16
Own bass
100%
Kick
90%
Click
65%
Tom MD
55%
Lead vocal
45%
Electric gtr
35%
Acoustic gtr
25%
Pad
20%

Acoustic guitar

No dedicated P16 slot — self-add via open channel

P16
Own guitar
100%
Click
65%
Kick / bass
55%
Tom MD
50%
Lead vocal
45%
Ben keys
35%
Backup vocals
25%
Pad
20%

Ben — Keys 1

Singer at Keys · P16 slot 1 (voice) + slots 7–8 (keys)

P16
Own voice
100%
Own keys
95%
Pad
75%
Lead vocal
65%
Click
55%
Tom MD
50%
Backup vocals
40%
Kick / bass
30%

Melvin — Keys 2

P16 slots 9–10

P16
Own keys
100%
Pad
65%
Click
60%
Kick / bass
55%
Tom MD
50%
Lead vocal
40%
Ben keys/voice
35%
Electric gtr
20%

Xvive U45 — self-mix via app · MX-Q / MXBus / M32-Q · 3 units

Click and Pad aren't sent automatically here — each singer pulls them in through the app if wanted. Percentages below assume you've added both.

Stage Left vocal

 

Xvive
Lead vocal
95%
Own voice
90%
Pad
70%
Ben voice
60%
Other backups
55%
Tom MD
50%
Click
25%
Kick / snare
20%

Stage Center vocal

 

Xvive
Lead vocal
95%
Own voice
90%
Pad
70%
Ben voice
60%
Other backups
55%
Tom MD
50%
Click
25%
Kick / snare
20%

Stage Right vocal

 

Xvive
Lead vocal
95%
Own voice
90%
Pad
70%
Ben voice
60%
Other backups
55%
Tom MD
50%
Click
25%
Kick / snare
20%